Detailed guide on hydraulic lift table maintenance

Normally, hydraulic lift tables will operate stably for a long period of time. However, during operation, we should regularly monitor the operating status of the lift table to limit arising issues. Maintenance of the hydraulic lift table is essential to keep the machinery running smoothly. The article below is a step-by-step guide for lift table maintenance that you can refer to.

When is hydraulic lift table maintenance needed?

The hydraulic lift table is a type of equipment with a simple structure, so users are often subjective when using it. Improper use of the lift table will shorten its lifespan. Therefore, after long-term use, damage is inevitable. Here are the signs you should check the lift table immediately:

The lift table stops working

When using the lift table, failure to follow maintenance principles or improper use can lead to damage. Some reasons for the table stopping operation are issues coming from the valve, system, or pump. For quick repair, intervention from skilled technicians is required to fix it.

Cracked welded frame

After a long period of operation, some details will wear out, causing noise. Usually, this error is due to a cracked welded frame, which is dangerous during use. Old welds are easily cracked, making the durability weaker and not as perfect as originally.

In the case of mechanical failures, users need to monitor and repair the lift table promptly to avoid unwanted incidents.

Clogged oil valve

When the oil valve is clogged in the lift table system, it will not supply enough hydraulic oil. This causes the lift table to malfunction during operation. Therefore, it is necessary to check and change the hydraulic oil periodically to ensure no blockages occur.

Difficulty in moving wheels

Wheels help move the lift table from one area to another during lifting and lowering. If the wheels are stuck, transportation will be difficult. At this time, the wheel system needs to be checked so that the lift table can operate smoothly.

Worn X-frame

Worn or loose X-frame joints will lead to unstable operation of the lift table. Therefore, the X-frame needs maintenance to continue operating.

Reference more: What is a hydraulic lift table power pack?

Detailed hydraulic lift table maintenance guide

Daily lift table inspection

After a working day, you need to observe and check the lift table system by:

• Checking for oil leaks: Closely observe pipes, joints, and hydraulic cylinders for signs of oil leakage. If any, fix it immediately to avoid system damage.
• Checking oil levels: Ensure the hydraulic oil level in the reservoir is within the specified range. If the oil level is low, add the correct type and amount of hydraulic oil.

• Checking wheel condition: Ensure wheels move smoothly, are not stuck, or excessively worn.
• Checking the lifting system: Operate the lift table up and down several times to check for stable operation, no shaking, or strange noises.
• Checking the control system: Ensure all buttons and switches are operating normally.

Monthly maintenance

Inspection and lubrication:

• Lubricate moving parts: Grease joints, shafts, wheels, chains, etc., according to the manufacturer’s instructions.
• Check the tightness of the hydraulic system: Carefully check pipes, joints, and hydraulic cylinders to ensure there are no leaks.

Electrical system inspection:

• Check wiring: Ensure wires are not damaged, broken, or bitten by rodents.
• Check electrical contacts: Clean and tighten electrical contacts to ensure good connection.

Annual maintenance

Changing hydraulic oil:

• Drain old oil: Open the oil drain valve at the bottom of the reservoir to drain all old oil.
• Clean the reservoir: Clean the oil tank with a specialized cleaning solution.
• Fill new oil: Pour the correct type and level of new hydraulic oil into the reservoir.

Comprehensive inspection:

• Check the hydraulic system: Inspect pumps, valves, cylinders, pipes, etc., to ensure good operation.
• Check the electrical system: Inspect the motor, controller, wiring, etc.
• Check the mechanical system: Inspect the lift table frame, wheels, lifting system, etc.

See more: Custom manufacturing of hydraulic lift tables

Notes when maintaining hydraulic lift tables

To keep the hydraulic lift table operating well, maintenance is essential. Here are some notes when maintaining and repairing lift tables that you should keep in mind:

• Follow the supplier’s maintenance instructions.
• Use the correct type of hydraulic oil and lubricant grease.
• Clean the lift table regularly to avoid dust and grease buildup on moving parts.
• Check components and ensure they operate correctly and safely.

If any abnormal signs are detected, stop using the lift table and contact a technician for support.

Important notes to know when using hydraulic lift tables

Quality hydraulic lift table maintenance provider in Hanoi

Naltako is one of the hydraulic lift table maintenance addresses trusted by many. With many years of experience, highly skilled technical staff, and quality service. When choosing Naltako for lift table repair, you will experience:

• Professional, well-trained, and highly specialized technicians.
• At Naltako, customers can be completely assured about costs. We also ensure clear cost consultation before customers use the service.
• Modern equipment system imported from countries with advanced science, ensuring quick, easy, and effective maintenance work.

Conclusion

We hope that with the above information, you have understood the detailed maintenance instructions for hydraulic lift tables. For the hydraulic lift table to operate safely and stably, you should perform regular maintenance. If you need assistance, please contact us immediately for timely advice and support.

Contact Information:

Naltako Industrial Joint Stock Company

Address: Dong De Village, Phu Yen, Chuong My, Hanoi.

Hotline: 0981.977.898.

Website: Naltako.vn